Applications - Kohler KD700 Operation

2.11 Applications

Touch the Applications button in the top bar to open the Applications screen. See Figure 48. From this screen, you can access
the screens listed in Figure 49. Note that access to some screens requires logging on as an operator.
Region settings
Reference
Display
cleaning
Firmware update
Save
parameters
Figure 48 Applications Screen
Screen Description
Reference Information on the administrative characteristics of the installation: name of the site, case
reference, software versions, etc.
Region settings Used to set the user language, the date, the time, the mechanical units used, insert a
customer- specific logo
HMI settings Used to adjust the screen brightness in standby mode, and the calibration of the touch
panel
Restart Used to reboot the HMI module
Display cleaning Used to lock the screen for 20 seconds to allow cleaning without adversely affecting
operation
Firmware update Used for the software update for the HMI module
Screenshot Used to take a screenshot to capture the installation at a given moment
Ladder tools Used to view additional equations
Save parameters Used to save the parameters of the application onto a USB key
Upload parameters Used to load parameters from a USB key
Figure 49 Screens Accessed from the Applications Screen
48
HMI settings
Upload parameters
Applications button
Screenshot
Restart
Ladder tools
Operator User
X X
X X
X X
X
X X
X
X X
X
X X
X X
TP-7070 11/22