Emergency Stop Fault
Manually pressing the emergency stop button causes a fault. After the emergency stop button is unlocked, the fault indicator will
turn off, and it will then be possible to reset this fault with the X button.
Figure 43
Resetting a Fault
2.10.4 Consulting Status Messages
Reviewing the status messages is possible at any time. Depending on the status type, the APM802 will log different messages:
•
Appearance
•
Disappearance
•
Appearance/Disappearance
•
Present/Not present
•
Open/Close
•
On/Off
•
Start/End
After pressing the Alarm (⚠) button, and if no fault or alarm is present, select Status messages history in drop-down menu A.
See Figure 44 and Figure 45.
Drop-down menu B (used to select between all, mechanical, or electrical type
status messages)
Figure 44
Drop-down Menus
TP-7070
11/22
Drop-down menu A (see Figure 45)
45