Controller Features - Kohler 500EOZCS Operation

1.5 Controller Features

The controller features include the annunciator lamp,
graphical display and pushbutton/rotary selector dial,
switches, and controls. See Figure 1-5 for an illustration
of the controller front panel. The following paragraphs
detail the features by general topics. The controller
provides:
The backlit LCD (liquid crystal display) for monitoring
D
the generator set functions and output values
Master control buttons with status lights
D
Fault lamp
D
Pushbutton/rotary selector dial to navigate the
D
generator set displays
Alarm horn and alarm silence switch/light
D
Mini USB connector for PC setup using SiteTecht
D
software
1
8
1. Emergency stop switch
2. Graphical display
3. Annunciator fault lamp
4. Alarm horn (interior, located behind controller face)
5. Pushbutton/rotary selector dial
Figure 1-5 Decision-Makerr 3500 Controller with Digital Display and Pushbutton/Rotary Selector Dial
18 Section 1 Specifications
2
The controller features, accessories, and menu displays
depend upon the engine electronic control module
(ECM) setup and features. Controller features apply to
generator set models with ECM and non-ECM engines
unless otherwise noted.
Note: Press the pushbutton/rotary selector dial to turn
on the controller lights and display. The backlight
turns off 10 minutes after the last entry when in
the AUTO mode.
Note: After about 5 minutes of no user input
(pushbutton/rotary selector dial or buttons), the
menu is reset to the top of the main menus and
auto-paging activates
submenus.
Note: Measurements display in metric or English units.
Use the Controller Configuration menu to change
the measurement display.
3
7
6. Mini USB connection
7. Generator set master control,
OFF/RESET- AUTO- RUN buttons with lamps
8. Alarm silence button with lamp
(press and hold for 3 seconds for lamp test)
for the Overview
4
5
6
TP-7126 5/20