Toshiba MMU-UP0071MH-UL Service Manual page 83

Monitoring function of wired remote controller
<RBC-AWSU5∗ ∗ ∗ ∗ ∗ >
1
Push [ Menu] to open the "Menu".
2
Push and hold [
• Push and hold 4 seconds.
3
Push [ ] and [
→ In a group connection, after a selection in the unit selection screen, move to the "Monitor function" screen.
4
Push [ ] to black highlight the code (DN), and then push [
CODE No. of the item to monitor. Refer to the next page for CODE No..
5
Push [ Return]
→ Return to the "Field setting menu" screen.
∗ ∗ ∗ ∗ ∗
<RBC-AMTU3 >
Content
Enter the service monitoring mode using the remote controller to check the sensor temperature or operation status of
the remote controller, indoor unit, and outdoor unit.
1
Push and hold the
mode.
The service monitor lights up. The CODE No.
2
Push the button to change to CODE No. of the item to monitor. Refer to the next page
TEMP.
for CODE No.
3
Push the left part of the
monitor. Monitor the sensor temperature or operation status of the indoor unit and outdoor
unit in the refrigerant line.
4
Push the button to return the display to normal.
Menu] and [ ] at the same time to open "Field setting menu".
] to select "Monitor function", and then push [
TEMP.
2
TIMER SET
FILTER
RESET TEST SET
4
, and for 4 seconds or longer to enter the service monitoring
UNIT LOUVER
button (left side of the button) to change to the item to
ON / OFF
FAN MODE
TIME SAVE VENT
CL SWING/FIX UNIT LOUVER
1 3
00 00 00 00 00
appears at first.
– 83 –
Set/Fix].
] and [ ] to change to