Toshiba MMU-UP0071MH-UL Service Manual page 37

No. Item
19 Louver control
(Continued)
Outline of specifications
<<Selection of Swing mode>>
Push the menu button, select 2. louver setting in the remote
controller menu, then select 1. Swing type, you can select
from 3 types of swing operation: "Standard", "Dual", or "Cycle".
you can select from 3 types of swing operation: "Standard",
"Dual", or "Cycle".
1) Standard (4 pieces: same phase) swing
When Swing operation is selected, four louvers align at
the horizontal discharge position and then start the
Swing operation at the same time.
2) Dual swing
When operation is selected, the louvers of louver No.
[01] and [03] move to the horizontal discharge position,
the louvers of louver No. [02] and [04] move to the
downward discharge position and then start the Swing
operation at the same time.
3) Cycle swing
When operation is selected, the louver No. [01] moves to
the horizontal discharge position, [03] to the downward
discharge position, [02] and [04] to the middle position
and then start the Swing operation at the same time.
<<Louver lock (Louver fix)>>
Push the menu button, select 2.louver setting in the remote
control menu, then select 2. Louver lock, you can set and
fix the angle of louvers individually for each air outlet.
Louvre 1 Louvre 2
Push [ ] to raise a louvre and push [
lower a louvre.
(1) (2)
All louvres
Louvre 4
Louvre 3
] to
Louvre not
(5)
(4)
(3)
– 37 –
Remarks
Subject model :
Compact 4-way
Carr y out setting operation
during stop of the unit;
otherwise the unit stops
operation.
Carry out setting operation
during stop of the unit;
otherwise the unit stops
operation.
locked