Toshiba MMU-UP0071MH-UL Service Manual page 139

No. Part name
1. Detachment
Electric
parts box
1) For the back air intake, perform the procedure in 1 of
"
2) Perform the procedure in 1 of "
cover."
3) Remove the binding bands and clamps inside the
electric parts box.
4) Remove the screws that fix the electric parts box into
place.
(M4 × 0.39" (10mm) 3 pcs)
The electric parts box will not fall off even when the
screws are removed.
5) Move the electric parts box in the direction opposite to
the air blow-off port side to disengage the hooking
plates and then remove the electric parts box from the
under air intake side.
2. Attachment
1) Insert the hooking plates of the electric parts box into
the hooking parts of the main body.
2) Carefully restore the electric parts box to its original
state without getting the cables caught by the box. Fix
the box using the screws that you removed in step 1-
4) of "
NOTE
• Make sure that the hooking plates are securely inserted
into the hooking parts of the electric parts box.
(Hooking plates: 2 locations)
• Make sure to securely fix the clamps and binding bands
of the cables that you disconnected.
Procedure
Suction panel."
Electric parts box."
Electric parts box
– 139 –
Remarks
Electric parts box
Binding band
Screw
Hooking part
Screws