Toshiba MMU-UP0071MH-UL Service Manual page 158

No. Part name
2. Attachment
Fan motor
(Continued)
Following to works of 1 of
as original in the reverse procedure.
* When attaching the fan motor, be sure that the fan motor
does not hit the motor base reinforcement plate.
* When attaching the fan motor reinforcement plate, be sure
that the fan motor reinforcement plate is not caught in the
motor band.
* Do wiring the fan motor lead to inside of the dashboard as
original, and then fix it to the dash-board with the fixing
band.
* After attaching the lead cover, gather the fan motor lead
and the earth lead and then fix them to the lead cover with
the fixing band.
* When attaching the fan motor reinforcement plate, be
careful to the screw hole position of the fan motor
reinforcement plate.
* When attaching the Silocco fan, meet the fixing screw for
Silocco fan to the notch position on the shaft of the fan
motor.
* After fixing the fan case, adjust the position of Silocco fan
at the center of the fan case from side of the discharge
port so that the Silocco fan does not hit to the fan case.
* For the tightening torque of the screw fixing the Silocco
fan, control between 3.7 to 3.8 ft•lbs (5.0 to 5.2 N•m).
Procedure
and 1) to 5), attach the parts
– 158 –
Remarks
Fixing Fan motor
band lead wire
Fixing screw for Silocco fan
Silocco fan
Fixing
band
Fan motor lead
wire
Lead cover
Fixing band
Grand lead wire
Shaft