No. Part name
1. Detachment
Refrigerant
cycle
1) Recover the refrigerant gas.
assembly
2) Take off the connecting pipe.
(Liquid pipe and gas pipe)
3) Following to works 1 of , and 1) to 10), detach the
parts.
4) Take off the reinforcement plate.
(M4 screw: 2 pieces)
5) Remove the upper panel )
(M4 screws: 4 pieces)
6) Remove the vertical grille.
(M4 screws: 4 pieces)
7) Remove the shield plate for heat exchanger (Front).
(M4 screws: 3 pieces)
8) Remove the shield plate for heat exchanger (Right).
(M4 screws: 3 pieces)
9) Take off the screws which fix the heat exchanger.
(M4 screws: 4 pieces)
10) Remove the shield plate.
(M4 screws: 2 pieces)
11) Slide the heat exchanger horizontally, release liquid
pipe, gas pipe from the drain pan, and then pull out it
to the upper side.
2. Attachment
Following step 1 of
parts as original in the reverse procedure.
Drain pan
1. Detachment
assembly
1) Following step 1 of
the parts.
2) Remove the drain pan assembly.
2. Attachment
Following step 1 in
as original in the reverse procedure.
Procedure
and those in 1) to 11), attach the
and those in 1) to 11), detach
and those in 1) to 2), attach the parts
– 148 –
Remarks