Tui Services - Nortel Meridian Meridian 1 Implementation Manual

Page 138 of 208
Table 34
Conferee commands (Part 2 of 2)
Conferee command

TUI services

This sections describes TUI services that are used when there is no
active conference.
Schedule a conference
When using the TUI scheduler, first enter the TUI user ID and
password. If a port is reserved for the TUI, only 31 ports are available
for conference use. After scheduling a conference using the TUI, the
BUI can be used to view, modify, or delete the conference.
The conference defined from the TUI has default attributes. Define the
conference parameters, through the telephone keypad, at the prompts
of a guided voice menu. The MICB plays messages when an error is
made.
Note: There are up to seven minutes to schedule a conference with
the TUI. After seven minutes, the MICB sends a voice message
indicating that the allotted time is over. The MICB then disconnects
the call.
The MICB sets up the following default attributes:
•
•
•
•
•
To schedule a conference through the TUI, follow the steps in
Procedure 21 on page
553-3001-358 Standard 1.00
*99
*
**
entry and exit by name
no custom greeting
no conference expansion
no name for the name of the conference
no name for the name of the chairperson
October 2003
Description
Stop or start the initial conference music, which is
possible only when the conferee is the first person
joining the conference. The first entry stops it, the
second entry starts it.
Aborts current command.
Start or stop the help menu.
139.