Micb Installation And Configuration Procedures - Nortel Meridian Meridian 1 Implementation Manual

MICB installation and configuration procedures

Once the site is prepared for installation and the system software is
configured, use the steps in Table 11 to complete the MICB installation.
Table 11
MICB installation summary
Step Description
1 Install a serial Maintenance terminal for preliminary card setup using the following
procedures:
• Procedure 4, "Install the Ethernet Adapter card," on page 62
Use one of the following three procedures to connect the serial Maintenance terminal to the
MICB as follows:
• Procedure 5, "Access the MICB directly," on page 63
• Procedure 6, "Access the MICB remotely using a modem," on page 64
• Procedure 7, "Access the MICB remotely using a LAN hub," on page 64
If your system is a Succession 1000, Succession 1000M Cabinet, or Meridian 1 Option 11C
Cabinet, use one of the following three procedures to connect the serial Maintenance
terminal to the MICB as follows:
• Procedure 8, "Access the MICB directly – Succession 1000, Succession 1000M
Cabinet, and Meridian 1 Option 11C Cabinet," on page 65
• Procedure 9, "Access the MICB remotely using a modem – Succession 1000,
Succession 1000M Cabinet, and Meridian 1 Option 11C Cabinet," on page 65
• Procedure 10, "Access the MICB remotely using a LAN hub – Succession 1000,
Succession 1000M Cabinet, and Meridian 1 Option 11C Cabinet," on page 66
2 Install the MICB card(s) using the following:
• Procedure 11, "Install MICB cards," on page 66
3 Configure the Maintenance terminal for command line interface (CLI) access as follows:
• Procedure 12, "Set up CLI access from the Maintenance," on page 66
Define the MICB Ethernet parameters using the CLI System Attributes Editor as follows:
• Procedure 13, "Configure initial card parameters using the CLI," on page 67
5 Complete the installation using the MICB BUI Install Wizard as follows:
• Procedure 14, "Access the administration BUI," on page 67
• See "MICB Installation Wizard" on page 68
MICB card(s) using the Install Wizard.
Meridian Integrated Conference Bridge
for a description of how to configure the
Service Implementation Guide
Page 61 of 208