Figure 78
MICB Dashboard – FIrmware Upgrade window
The top-right corner of the window shows the current hardware and
firmware versions. The firmware version takes the form of "3.xx", where
3 is the MICB release and xx is the firmware version number.
The MICB can retrieve firmware upgrade files from the following two
sources:
1 A PCMCIA disk in the upper socket of the card.
2 A remote FTP server.
The first step is to specify the upgrade source by clicking on one of the
radio buttons. Depending on the source selected, the following
procedures describe how to perform the firmware upgrade.
Procedure 32
Firmware upgrade from MICB card upper socket
1
2
3
Meridian Integrated Conference Bridge
Click on the MICB card upper socket radio button.
Insert the PCMCIA disk in the upper socket of the MICB card.
Click on the Upgrade & Restart button.
The MICB copies the files from the upper socket and performs a restart.
When the restart is complete, the current BUI session is lost. Login again as
an administrator. When returning to this window, the new firmware version
should appear in the top-right corner of the window.
This procedure is now complete
Page 189 of 208
Service Implementation Guide