3
Run the REstordb command with the parameter indicating this is a restore
following an FTP download.
The system prompts for the source.
4
Select FTP.
The system prompts for the following parameters: IP address, path to file,
login, and password.
5
Enter the information as appropriate and press the Enter key.
The system restores the data.
During the restore process the card disables itself and does not answer
calls. It also does not accept changes from the BUI.
Backup and restore process log
The backup process sends messages to the CLI window. The
messages can be viewed while the process is running by accessing the
CLI.
The system generates two files that contain information about the
backup progress. The backup.log in the USER directory contains one
line for each of the last backups, and restorations, up to a maximum of
20. Each line contains the following:
•
a time stamp
•
whether it was a manual or scheduled backup to
— disk or
— E-mail
•
whether it was a restoration and from which source
•
whether it was successful or failed
The LASTBKP.LOG file in the GNR directory provides a more detailed
report. This file contains much of the information that the CLI prints
while the process is running. The system keeps this file with the backup
database, regardless of how the backup is performed. The system
keeps this file on the primary PCMCIA along with the ZIP file, if the ZIP
file is required to be saved. The LASTBKP.LOG file can be viewed at
the received E-mail location.
Meridian Integrated Conference Bridge
This procedure is now complete
Service Implementation Guide
Page 163 of 208