Nortel Meridian Meridian 1 Implementation Manual page 106

Page 106 of 208
Procedure 17
Replace the brandline greeting
1
2
3
4
There are two additional action buttons as follows:
•
•
Conference-specific greeting
Use these fields in the Greeting Settings window to enable or disable
the Conference-specific Greeting feature. Click on the Available radio
button to enable the conference-specific greeting. When selected, the
administrator can define the maximum length of the greeting. The range
is from two to 10 seconds; the default is five seconds.
553-3001-358 Standard 1.00
Upload the .WAV file from your computer to the MICB using your computer's
operating system.
a Click on the Browse button.
A Choose dialog box opens on your computer.
b Scroll through the dialog box to select the location of the .WAV file and
click on the Open button.
The system closes this dialog box and the selected file's name appears
in the read-only Local file: text box.
c Click on the Upload button.
The MICB loads the file into the card and adds the file name to the
combo-box next to the selected language.
Note: The upload action is immediate. There is no need to submit and save
it. It cannot be cancelled by clicking on the Reset button.
Click on the radio button next to the language in the table to select the
language.
Select the desired .WAV file you uploaded in the File column for that
language.
Click on the Submit button to save the change.
Play – Click on this button to play the selected greeting. The system
plays the file of the selected language on your computer.
Delete – Click on this button to delete the selected greeting from the
card. The system removes the file's name from the combo-box.
Before deleting the file, the BUI opens a dialog box that asks: "Are
you sure you want to delete greeting file xxxx.WAV?"
After the system deletes the file, it removes the file from the
combo-box that contained it. The selection returns to the "factory
default" greeting.
Note: The delete action is immediate. There is no need to submit
and save it. It cannot be cancelled by clicking on the Reset button.
October 2003
This procedure is now complete