Page 30 of 208
Conferees can exit a conference at any time. The MICB detects when
a conferee exits the conference. If enabled, the MICB announces the
conferee's name. When one conferee is on the conference, the system
issues an announcement that only one conferee is present, followed by
60 seconds of music. The system repeats this announcement and the
music, until at least one more conferee joins in, or the MICB terminates
the conference.
Note: A conference can begin and end two minutes before the
defined time. This feature allows the system to close all terminating
conferences two minutes earlier and start all scheduled conferences
immediately after closing the terminating conferences. This feature is
important when terminating and starting conferences use some of
the same DNs.
553-3001-358
Standard 1.00
October 2003