Table 16 describes the parameters, from top to bottom, of the Dual Card
Meetings window.
Table 16
Dual Card Meetings parameters
Item
Description
IP address of
Enter the IP address of the secondary card.
secondary card
Conference
Enter the DN of the dual-card meeting. Callers will dial this number to access the
access number
dual-card meeting.
Chairperson
Enter the chairperson DN for the dual-card meeting. The chairperson uses this
number in
number to access the dual-card meeting.
primary card
Transfer number
Enter the DN that the MICB uses to transfer calls from the primary card to the
secondary card. The system hides this number from end users.
Link number
Enter the DN that the MICB uses to create a voice path between both cards. The
system hides this number from end users.
Chairperson
For more information, see
control of dual
meeting
Full control including secondary card – If this is clicked, the chairperson
commands apply to both cards. In this case, the maximum conference size in a
64-port card pair is 60 ports.
Control of secondary card is limited – If this is clicked, some chairperson
commands are limited to the primary card (for example, TUI roll call command
and dial out)
Meridian Integrated Conference Bridge
"Dual-card meeting" on page
.
The maximum conference size in a 64-port card pair is 62 ports.
Page 75 of 208
98.
Service Implementation Guide