Nortel Meridian Meridian 1 Implementation Manual page 190

Page 190 of 208
Procedure 33
Firmware upgrade using FTP
1
2
3
4
Upgrade to the single DN access method
Follow the steps in Procedure 34 to upgrade an existing MICB 2 card to
MICB 3 configured with single DN access.
Procedure 34
Upgrade to single DN access
1
2
3
553-3001-358 Standard 1.00
Click on the FTP Server radio button.
Enter the FTP parameters in the fields the window provides as follows:
a IP address – the remote FTP server where the upgrade files are stored.
b Path to file – path of the folder on the computer where the upgrade files
are stored (for example, c:\micb\3_07).
c Login – login name for FTP.
d Password – password for FTP login.
Click on the Get Files button to start the FTP transfer session.
After the previous steps finishes, click on the Upgrade & Restart button.
The MICB copies the files from the FTP server and performs a restart. When
the restart is complete, the current BUI session is lost. Login again as an
administrator. When returning to this window, the new firmware version
should appear in the top-right corner of the window.
This procedure is now complete
Follow Procedure 30 on page 186
card.
Configure the DNs.
a Remove the DN pairs from the switch datafill. For more information, if
your system is a Succession 1000M, Succession 1000, or Meridian 1,
see "Assign ACD DNs" on page
see "Single-card configuration" on page
Note: DN pairs can be left in the MICB. Callers to existing conferences
configured with direct access DNs will be requested to enter the access DN to
reach the meeting.
b Configure the single access DN in the switch. For more information, if
your system is a Succession 1000M, Succession 1000, or Meridian 1,
see "Assign ACD DNs" on page
see "Single-card configuration" on page
Note: This DN should be forwarded to the MICB card main ACD DN.
Access the MICB Installation Wizard and perform the following (see
– Access Numbers" on page
a Click on the first Radio button for the single DN access method.
b Enter the new single-access DN.
c Click on the Submit & Continue button.
The new single DN access method now applies.
October 2003
to upgrade an MICB 2 card to an MICB 3
43; if your system is a Meridian SL-100
51.
43; if your system is a Meridian SL-100
51.
72):
"Step 2