Nortel Meridian Meridian 1 Implementation Manual page 114

Page 114 of 208
Import users
Use the Import User button in the User List window to import the user
list from the mate MICB card in a dual-card pair. This button only
appears in a primary or secondary MICB card; it does not appear in
stand-alone MICB configurations. Use this window to define the same
users on both cards, instead of re-entering all user data a second time.
The user list can be imported after entering it on the first card.
Before importing, the Dual Meeting parameters must be defined (see
"Step 4 – Dual Card Meetings" on page
address is not configured, an error message appears.
After clicking on the Import User button, the confirmation dialog box in
Figure 56 appears.
Figure 56
MICB Dashboard – Import Users Confirmation box
Table 26 describes the information that this message displays.
Table 26
Import Users Confirmation box text
Text line
First
Second
Third
Fourth
Fifth
553-3001-358 Standard 1.00
Import users from MICB card 141.226.111.222:
30 users are already defined.
Up to 70 more users can be imported.
The existing users will not be changed.
Continue ?
Description
Indicates from which card the users will be imported. If the card is the primary
card it shows the IP address of the secondary card and vice versa.
Shows how many users are already defined in this card.
Shows how many users can be imported. An MICB card can have up to 100
users. When the number of users reaches 100, the system terminates the import
process.
Informs the administrator that existing users will not be changed (that is, the
system does not import a user ID if an identical user ID already exists on the
card).
Asks for confirmation, or cancellation, of the import.
October 2003
73). If the second card's IP