Nortel Meridian Meridian 1 Implementation Manual page 102

Page 102 of 208
Table 23
General Settings window fields
Field
Administration
E-mail
Billing option
Card ID (4 digits)
Ports overbooking
Reserve port for
TUI
Name recording
length
Conference
auto-generated
password length
Week working
days
Outdated
Conferences &
Reports: remove
after
553-3001-358 Standard 1.00
Description
Enter the E-mail address to which the MICB sends administration material,
including backup files.
Select a billing option for this card from the pull-down menu. The options are as
follows:
• No billing – The MICB does not issue a billing report.
• Billing reports – The MICB issues a billing report (see
page 172).
• Billing reports & CDR – The MICB issues a billing report and a CDR record
(see "Succession 1000M, Succession 1000, and Meridian 1 Call Detail
Recording" on page
Note: The Billing reports & CDR record option is not available on the Meridian SL-100.
Enter the card ID that the system uses for billing purposes.
Range: A four-digit decimal.
Enter the number of ports the Overbooking feature adds. The available values
are shown in the form of 32 + N, where 32 is the physical capacity and N is the
addition for overbooking.
Range: From 32 + 0 (no overbooking) to 32 + 8 for cards with 32 ports. In cards
with less than 32 ports, the maximum N is the proportional fraction of 8 (for
example, 16 + 4 for a card with 16 ports).
Default: N = 0 (no overbooking).
Click in the box to dedicate one of the card's port for TUI access, which is not
available for meetings. When this box is not checked, the system does not
reserve a port for the TUI; when all ports on the MICB are busy the TUI is
inaccessible.
Enter the duration, in seconds, of the spoken name in the name-entry option.
When the system prompts the callers for their name, recording after the beep
takes place for the specified duration.
Range: 2-10 seconds.
Default: 2 seconds.
Enter the number of digits for the conference or chairperson password, when a
user selects the password to be automatically generated by the MICB.
Select the range of working days from the pull-down menu. The MICB uses this
information when creating recurrent conferences with the option "Workday".
Range: Any day of the week.
Default: Monday to Friday.
From the pull-down menu, select the number of days these files are kept before
the system deletes them (also referred to as the "aging factor"). For scheduling
data, this field applies to conferences that have already taken place. The system
keeps future conferences as long as required.
October 2003
177).
"Billing Report" on