Nortel Meridian Meridian 1 Implementation Manual page 188

Meridian integrated conference bridge
Hide thumbs Also See for Meridian Meridian 1:
Table of Contents

Advertisement

Page 188 of 208
Figure 77
MICB Dashboard – Card Upgrade window
A ports upgrade is purchased from Nortel Networks, it comes with a
new keycode for the card. Follow the steps in Procedure 31 to perform
the port upgrade.
Procedure 31
Upgrade ports from the administrator's MICB Dashboard
1
2
3
Firmware Upgrade
Upgrade the MICB 3 firmware from the following two sources: the
secondary PCMCIA device or a remote FTP server. Use a BUI
administration window for the upgrade process, which supports both
options (see
553-3001-358
Standard 1.00
From the pull-down menu, select the new number of ports in the combo-box.
The current number of ports appears as view-only above this box.
Enter the keycode. The keycode is 24 digits. To simplify input, the system
divides the keycode into three sets of eight digits each.
The system displays the input characters they are entered.
Click on the Submit button.
The system submits the change only if the keycode entry is correct. If the
entry is incorrect, the following message appears: "Keycode is incorrect!
Re-enter the keycode."
Before clicking on the Submit button, operation can be cancelled by clicking
on the Dashboard button on top of the window.
Note: Ports must be configured in the switch in order for them to be operational.
This procedure is now complete
Figure 78 on page
October 2003
189). The CLI can also be used.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Meridian 1Succession 1000m1000 con?guration guide

Table of Contents