Configuring The Route Data Block (Ld 16) - Nortel CallPilot Quick Start Manual

22 CallPilot resource configuration
6
Table 8
LD 15 - Configuring Integrated Services Digital Network
Prompt
REQ
TYPE
CUST
ISDN
PNI
HLOC
LSC
7
Configuring the Route Data Block (LD 16)
Perform the following procedure to configure the Route Data Block.
Copyright © 2007, Nortel Networks
.
Enter the appropriate values as described in the following table to
define Integrated Services Digital Network. For prompts not listed in
the following table, press Enter to accept the default.
Response
CHG
net
xx
YES
NO
xxxxx
xxxx
xxxx
To exit the overlay, enter ****.
Tech tip: To view a list of installed packages, enter LD 22 and enter
PRT at the REQ prompt, then PKG. Use the capture text function in
hyperterminal to save a text file of the output.
Nortel CallPilot
Quickstart Guide
NN44200-313 01.01 Standard
5.0 11 July 2007
Notes
Customer number for CallPilot.
Enter NO if NMS is not
installed on the CS 1000 or M1
system.
Private Network Identifier.
Within one network, use the
same PNI value in LDs 15
and 16. When you interwork
with different networks, enter
the PNI of this CS 1000 or
M1 system in LD 15, and the
PNI of the target or remote CS
1000 or M1 system in LD 16.
The default PNI = 0 prevents
the operations of features such
as NRAG, NACD and NMS.
Home Location Code defined
in LD 90.
Local Steering Code defined
in LD 15.
—End—