Configuring Phantom Dns; Nn44200-313 01.01 Standard - Nortel CallPilot Quick Start Manual

Appendix
Configuring phantom DNs
This appendix describes how to configure phantom DNs.
There are two reasons to configure phantom DNs on the switch:
•
•
Checking for existing phantom loops
Step
A phantom loop must exist before you begin to configure phantom DNs. Use
this procedure to identify a phantom loop.
1
2
3
4
5
6
Configuring a phantom superloop
Step
1
Copyright © 2007, Nortel Networks
.
to create a dialable number for CallPilot services such as Application
Builder configurations and voice forms
to create virtual fax DNs for users who want a separate fax number
Action
Connect to the PBX.
Enter LD 97.
At the REQ prompt, enter PRT.
At the TYPE prompt, enter SUPL.
Use the capture text function in hyperterminal to save a text file of
the output.
Review the output for a superloop tagged PHANTOM. If a phantom
loop does not exist, perform the procedure below to create one.
Action
Connect to the PBX.
Nortel CallPilot
Quickstart Guide

NN44200-313 01.01 Standard

5.0 11 July 2007
—End—
63