Verifying That You Can Leave A Message; Verifying That You Can Retrieve A Message; Verifying That Each Callpilot Channel Is Functioning Correctly; Nn44200-313 01.01 Standard - Nortel CallPilot Quick Start Manual

5

Verifying that you can leave a message

Perform the following procedure to check that you can leave a message.
Step
1
2

Verifying that you can retrieve a message

Perform the following procedure to check that you can retrieve a message.
Step
1
2
3

Verifying that each CallPilot channel is functioning correctly

Perform the following procedure to check that CallPilot channels are
functioning correctly.
Step
1
Copyright © 2007, Nortel Networks
.
Verifying that each CallPilot channel is functioning correctly 57
The default password is 12 + mailbox number. For example, if the
mailbox number is 4500 the password is 124500.
When prompted, type a new password, followed by the # key.
Re-enter the new password followed by the # key to confirm the
changed password.
Action
On a test telephone, dial the DN of that telephone.
You are automatically forwarded to CallPilot voice messaging.
After the tone, leave a test message.
Action
On a test telephone, dial the CallPilot voice messaging CDN.
Log on to the mailbox where the message was left in the procedure
"Verifying that you can leave a message" (page
Press 2 on the telephone to play the message.
Action
Log on to CallPilot Manager on the local console.
Nortel CallPilot
Quickstart Guide

NN44200-313 01.01 Standard

5.0 11 July 2007
—End—
—End—
—End—
57).