Nortel CallPilot Quick Start Manual page 48

48 CallPilot server configuration
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Copyright © 2007, Nortel Networks
.
In the Service Update (SU)/PEP Installation page, select Yes, I
have updates that I want to install now.
Click Next.
A message appears, prompting you to install SUs and PEPs.
Browse to the PEP CD in the DVD-ROM (Z:) drive. For every PEP
or SU to be installed, review the readme file for important steps
required for the PEP or SU.
Tech tip: Ensure you read the readme file; readme files can contain
important steps pertaining to specific PEPs or SUs that are not
covered in this procedure.
To install an SU or PEP, double-click the runme.exe or runme.bat file
and click OK.
In the Service Update (SU)/PEP Installation page, select SU or PEP
to install and click Next.
A confirmation message appears. Click Yes to continue.
If you are prompted to restart the server, do so.
Repeat steps 3 to 9 for each PEP or SU to be installed.
Note: If the system reboots, log back in to the system. If
the Setup Wizard does not start automatically, select Start >
Programs > CallPilot > Setup Wizard.
In the Setup Wizard Welcome screen, click Next.
In the Service Update (SU)/PEP Installation page, select No, I do
not have updates that I want to install now.
Click Next.
In the Platform Validity page, check that the values listed are correct
and marked with green check marks. Click Next.
In the Telephony Board Validation page, click Next.
In the Upgrade of CallPilot page, click No, I do not have data to
restore.
Click Finish.
Nortel CallPilot
Quickstart Guide
NN44200-313 01.01 Standard
5.0 11 July 2007
—End—