Configuring System Parameters (Ld 17) - Nortel CallPilot Quick Start Manual

Prompt
ELAN
SECU
5
Configuring system parameters (LD 17)
Tech tip: To view a list of all provisioned system parameters, enter LD 22
and enter PRT at the REQ prompt, then CFN. Use the capture text function
in hyperterminal to save a text file of the output.
Step
1
2
3
Table 4
LD 17 - Configuring system parameters
Prompt
REQ
TYPE
NCR
Copyright © 2007, Nortel Networks
.
Response
xx
YES
To exit the overlay, enter ****.
Tech tip: To view the new ELAN, enter LD 22. Enter PRT at the REQ
prompt, then ADAN. A list of all provisioned IDs appears. Use the
capture text function in hyperterminal to save a text file of the output.
Action
Connect to the PBX.
Enter LD 17.
Enter the appropriate values as described in the following table.
For prompts not listed in the following table, press Enter to accept
the default.
Response
CHG
PARM
xxx
Nortel CallPilot
Quickstart Guide
NN44200-313 01.01 Standard
5.0 11 July 2007
Configuring system parameters (LD 17) 19
Notes
Enter the number entered for
the ELAN ID above.
—End—
Notes
Enter the number of DS0
channels multiplied by 2 plus
the current NCR.
For example, if the current
NCR is 500 and there are 24
DS0 channels, enter 548.