Configuring Static Forwarding - Nortel 8300 User Manual

80 Configuring VLANs
Clearing learned MAC addresses for all VLANs by port
To clear learned MAC addresses from the forwarding database for all
VLANs by port:
Step
1
2
3
4
5
Configuring static forwarding
To configure forwarding information:
Step
1
2
3
4
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Action
Select a port from the Device Manager Main window.
The port is highlighted.
Select Edit > Port from the menu bar.
The Port dialog box appears with the Interface tab selected. See
"Port dialog box - Interface tab" (page
Select the FlushMacFdb option button in the Action field.
Click Apply.
Click Close.
All learned MAC addresses are cleared from the forwarding
database for VLANs associated with this port.
Action
Select VLAN > VLANs from the Device Manager menu bar.
The VLAN dialog box appears with the Basic tab selected. See
Figure 20 "VLAN dialog box - Basic tab" (page
Select a VLAN in the VLAN dialog box.
Click Bridge.
The Bridge, VLAN dialog box appears with the Transparent tab
selected. See "Bridge, VLAN dialog box - Transparent tab" (page
76).
Click the Static tab.
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
—End—
72).
—End—
58).