Field
UpdateDynamicMacQosLevel
QosLevel
Configuring a VLAN to accept tagged or untagged frames
To configure a VLAN to accept tagged or untagged frames from a port:
Step
1
2
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Description
This field is used to indicate whether to update the QoS level
for dynamically learned MAC addresses associated with a
subnet-based or protocol-based VLAN. If it is set to ENABLE, the
QoS level for all dynamically learned MAC addresses is changed
when changing the VLAN QoS level. If set to DISABLE, when
a MAC address is learned, the QoS level is not updated when
the VLAN QoS level changes.
Indicate the quality of service level of the destination Mac
Address of incoming frames on this VLAN.
•
level0 (lowest priority)
•
level1 (default)
•
level2
•
level3
•
level4
•
level5
•
level6
•
level7 (highest priority)
Action
Select the port in the Device Manager main window.
The port is highlighted.
Select Edit > Port from the Device Manager menu bar.
The Port dialog box appears with the Interface tab selected. See
"Port dialog box - Interface tab" (page
The tab label varies, depending on the module that you selected.
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
Managing a VLAN 71
72).