Deleting An Stg - Nortel 8300 User Manual

102 Configuring Spanning Tree Group

Deleting an STG

To delete an STG:
Step
1
2
3
4
Configuring topology change detection
To configure topology change detection on a port:
Step
1
2
3
4
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Action
Select VLAN > STG from the Device Manager menu bar.
The STG dialog box appears, with the Globals tab selected. See
"STG dialog box - Globals tab" (page
Click the Configuration tab.
The Configuration tab appears. See
tab" (page 93).
Select the STG that you want to delete.
All VLANs must be deleted from an STG before you can remove it.
Click Delete.
You cannot delete STG 1, the default STG.
Action
Select VLAN > STG from the Device Manager menu bar.
The STG dialog box appears, with the Globals tab selected. See
"STG dialog box - Globals tab" (page
Click the Ports tab.
The Ports tab appears.See
Double-click the ChangeDetection field for the port of your choice.
The drop-down list of change detection options appears.
Select one of the following from the drop-down list:
•
To enable change detection on the port, select true.
• To disable change detection on the port, select false.
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
—End—
92).
"STG dialog box - Configuration
—End—
92).
"STG dialog box - Ports tab" (page 99).