Using Mlt-Based Smlt With Single Port Smlt; Figure 17 Smlt Full Mesh Topology - Nortel 8300 User Manual

Figure 17
SMLT full mesh topology

Using MLT-based SMLT with single port SMLT

You can configure a split trunk with a single port SMLT on one side and
an MLT-based SMLT on the other. Both must have the same SMLT ID. In
addition to general use,
SMLT to single port SMLT" (page
used for upgrading an MLT-based SMLT to a single port SMLT without
taking down the split trunk.
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Figure 18 "Changing a split trunk from MLT-based
50)shows how this configuration can be
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
Split MultiLink Trunking 49