Table 14 Bridge, Vlan Dialog Box - Filter Tab Fields - Nortel 8300 User Manual

84 Configuring VLANs
6
7
8
9
10
11
12
13
Table 14 "Bridge, VLAN dialog box - Filter tab fields" (page 84)
the Bridge, VLAN dialog box, Filter tab fields.
Table 14
Bridge, VLAN dialog box - Filter tab fields
Field
MacAddress
VlanId
Port
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Enter the MAC address, in the MacAddress field, used to match the
destination address of incoming packets.
Click the (...) in the Port field.
The BridgeFilterPort dialog box appears.
Select the port number for this MAC address.
Click Ok.
The BridgeFilterPort dialog box closes and the port is added to the
Port field on the Bridge, VLAN, Insert Filter dialog box.
Select a drop method option button in the DropCommand field:
• none: No packets are dropped.
• srcDrop: Drops packets with this source MAC address.
• dstDrop: Drops packets with this destination MAC address.
• bothDrop: Drops packets with this source and destination MAC
address.
Click Insert.
The Bridge, VLAN, Insert Filter dialog box closes and the filter
appears in the Filter tab.
Click Close in the Bridge, VLAN dialog box.
Click Close in the VLAN dialog box.
The filter is configured.
Description
The MAC address of this entry. This address is used to match
the destination address of incoming packets.
Specifies the virtual LAN identifier.
The port that this MAC address is found on.
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
—End—
describes