Table 21 Slpp - Ports Tab Fields - Nortel 8300 User Manual

3
4
Table 21 "SLPP - Ports tab fields" (page 107)
tab fields.
Table 21
SLPP - Ports tab fields
Field
IfIndex
PktRxThreshold
SlppEnable
IncomingVlanId
SrcNodeType
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Double-click the SlppEnable box for a port and select true to enable
SLPP.
Click Apply.
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
Configuring Simple Loop Prevention Protocol 107
—End—
describes the Slpp, Ports
Description
Specifies the interface index number for a port.
Specifies the threshold for packet reception
from 1 – 500. After a port reaches the packet
threshold, it is disabled.
Enables or disables SLPP on the selected
IfIndex.
VLAN ID of the classified packet on a port
disabled by SLPP.
Specifies the source node type of the received
SLPP packet.