Nortel Ethernet Routing Switch - Nortel 8300 User Manual

116 Configuring static link aggregation
Field
OutMulticast
InBroadcastPkt
OutBroadcast
Viewing link aggregation Ethernet error statistics
To view link aggregation Ethernet error statistics:
Step
1
2
3
4
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Description
The total number of packets that higher-level protocols
requested be transmitted, and that were addressed to a
multicast address at this MLT, including those that were
discarded or not sent. For a MAC layer protocol, this number
includes both Group and Functional addresses.
The number of packets delivered to this MLT that were
addressed to a broadcast address at this sublayer.
The total number of packets that higher-level protocols
requested be transmitted, and that were addressed to a
broadcast address at this MLT, including those that were
discarded or not sent.
Action
Select VLAN >MLT from the Device Manager menu bar.
The MLT dialog box appears and displays active link aggregation
groups. See "MLT dialog box - MultiLink Trunks tab" (page
Click in the row of a link aggregation group to select it.
The Graph button is activated.
Click the Graph button.
The Statistics, MLT dialog box appears, with the interface tab
selected.
Click the Ethernet Errors tab.
The Ethernet Errors tab appears, and displays the statistics. See
"Statistics, MLT dialog box - Ethernet Errors tab" (page

Nortel Ethernet Routing Switch 8300

NN46200-510 03.01 Standard
4.0 27 August 2007
110).
117).