Enabling Or Disabling Port Auto Recovery For Multiple Ports - Nortel 8300 User Manual

Enabling or disabling port auto recovery for multiple ports

Perform the steps in the following procedure to enable or disable port auto
recovery for multiple ports on the ERS 8300.
Step
1
2
3
4
5
6
7
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Action
Hold down the Ctrl key on your keyboard.
From Device Manager, click on two or more ports.
From the Device Manager main menu, select Edit > Port.
OR
Right-click on one of the selected ports and select Edit from the
menu that appears.
The edit window for the selected ports appears with the Interface
tab displayed.
Double-click on the AutoRecoverPort box for one of the ports.
To enable auto recovery on the port, select true.
OR
To disable auto recovery on the port, select false.
Repeat steps 4 and 5 as required.
Click Apply.
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
Configuring port auto recovery 89
—End—