82 Configuring VLANs
Table 13 "Bridge , VLAN - Static tab fields" (page 82)
tab fields on the Bridge, VLAN dialog box.
Table 13
Bridge , VLAN - Static tab fields
Field
MacAddress
Port
VlanId
QosLevel
Status
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
—End—
Description
The destination MAC address in a frame, to which this entry's
forwarding information applies. This object can take the value of
a unicast address.
The port number of the port that the frame is received on.
Specifies the virtual LAN identifier.
Indicate the quality of service level of the incoming frames with
this destination Mac Address.
•
level0 (lowest priority)
•
level1 (default)
•
level2
•
level3
•
level4
•
level5
•
level6
•
level7 (highest priority)
In the Static tab, displays one of the following states for this entry:
•
permanent — in use and remains so after the next bridge
reset. This value is the default
•
deleteOnReset — in use and remains so until the next
bridge reset
•
deleteOnTimeout — currently in use and remains so until
it is aged
•
other — in use but the conditions under which it remains so,
are different from other values
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
describes the Static