Smlt Network Design Considerations; Figure 18 Changing A Split Trunk From Mlt-Based Smlt To Single Port Smlt - Nortel 8300 User Manual
Configuration — vlans, spanning tree, and static link aggregation using device manager
Hide thumbs
Also See for 8300:
- Reference manual (220 pages) ,
- Troubleshooting manual (186 pages) ,
- Maintenance manual (98 pages)
Table of Contents
Advertisement
50 VLANs, Spanning Tree, and Static Link Aggregation
Figure 18
Changing a split trunk from MLT-based SMLT to single port SMLT
SMLT network design considerations
Use the following base guidelines when designing an SMLT network (for
more information, refer to Nortel Ethernet Routing Switch 8300 Planning
and Engineering — Network Design Guidelines (NN46200-200)).
Step
1
2
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Action
Define a separate VLAN for the IST protocol:
config mlt 1 ist create ip <value> vlan-id <value>
Enable tagging on IST trunk links:
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
Advertisement
Table of Contents
