Stgportmembers Dialog Box; Table 16 Stg Configuration Tab Fields - Nortel 8300 User Manual

94 Configuring Spanning Tree Group

StgPortMembers dialog box

6
7
8
9
Nontagged ports can belong to only one STG.
Table 16 "STG Configuration tab fields" (page 94)
Configuration tab fields.
Table 16
STG Configuration tab fields
Field
Id
Priority
BridgeMaxAge
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Click the ports you want to add to the STG.
Click OK.
The StgPortMembers dialog box closes, and the ports are added to
the PortMembers field in the STG, Insert Configuration dialog box.
Click Insert.
The STG, Insert Configuration dialog box closes, and the STG
appears in the Configuration tab.
Click Apply.
The STG is configured.
Description
The ID number for the STG.
The STG ID and TaggedBpduVlanId must be unique in the STG table.
If you change the STG ID without updating TaggedBpduVlanId, the
insertion can fail because of a duplicate TaggedBpduVlanId.
Sets the STP bridge priority. The range is 0 (highest priority) to 65535
(lowest priority). The default is 32768.
The value (in hundredths of a second) that all bridges use for MaxAge
when this bridge is acting as the root.
The 802.1D-1990 standard specifies that the BridgeMaxAge range
is related to the value of dot1dStpBridgeHelloTime. The default is
2000 (20 seconds)
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
—End—
describes the STG