Configuring The Slpp By Vlan; Table 19 Slpp - Global Tab Fields - Nortel 8300 User Manual

104 Configuring Spanning Tree Group
4
5
Table 19 "SLPP - Global tab fields" (page 104)
SLPP Global tab.
Table 19
SLPP - Global tab fields
Field
GlobalEnable
TransmissionInterval
EtherType
Configuring the SLPP by VLAN
Step
1
2
3
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
In the EtherType dialog box, enter the SLPP protocol value as a
hexadecimal number.
Click Apply.
Description
Globally enables or disables SLPP. The SLPP packet
transmission and reception process is active only when the SLPP
operation is enabled. When the SLPP operation is disabled, no
SLPP packet is sent, and any received SLPP packet is discarded.
Sets the interval (in milliseconds), for which loop detection
occurs. The range is 500 – 5000 ms, and the default is 500 ms.
Specifies the SLPP protocol identification. This value is
expressed in hexadecimal format, in the range of 1 – 65535.
Action
From the Device Manager menu bar, select VLAN > SLPP.
The Slpp box appears with the Global tab open.
Click the VLANS tab.
The VLANS tab appears.
Click Insert.
The Slpp, Insert VLANS window appears.
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
—End—
describes the fields of the