5
6
Port SMLT tab fields
box. An empty table field indicates the port is not part of an MLT, and it is
not configured for single port SMLT.
Viewing single port SMLTs configured on the switch
To view the single port SMLTs configured on the switch:
Step
1
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
The Insert SMLT dialog box appears. See
(page
123).
Insert SMLT dialog box
Enter an unused SMLT ID number (from 1–512) in the SmltId field.
Click Insert.
The Insert SMLT dialog box closes, and the ID is entered in the
SmltId field of the SMLT tab.
describes the fields on the SMLT tab of the Port dialog
Action
Select VLAN > SMLT from the Device Manager menu bar.
The SMLT dialog box appears with the Single Port SMLT tab
selected, which displays all single port SMLTs configured on the
switch. See
"Single Port SMLT tab on the SMLT dialog box" (page
123).
Single Port SMLT tab on the SMLT dialog box
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
Configuring SMLT 123
"Insert SMLT dialog box"
—End—
—End—