Step 2.
Push the lever toward the direction indicated by the arrow shown in Figure
4-27 below.
Lever
Figure 4-33 Removing a Memory Card
Step 3.
Pull out the memory card as shown in Figure 4-28 below.
Figure 4-34 Memory Card Removed
Caution:
!
GR2K-GA-0007
Rev. 5.00
While the access indicator (ACCESS) for a memory card is lit, the memory
card is being accessed. DO NOT pull out a memory card or turn off the power
switch while the memory card is being accessed. If so, you could
permanently damage the memory card.
Some commands require a long time to finish accessing a memory card
when they are executed. Make sure that the access to a memory card is
finished before pulling it out or turning off the power switch.
Memory Card Inserted
Setup
4-23