Installing A Network Interface Board; Figure 5-5 Inserting A Network Interface Board (Gr2000-Bh); Figure 5-6 Fastening A Network Interface Board In Place (Gr2000-Bh) - Hitachi GR2000-B Series Installation Manual

Hitachi Gigabit Router GR2000-B Series Installation Guide
5.4.1.2

Installing a Network Interface Board

Step 1. Insert a network interface board into Network Interface Slot 0
referring to the figure below.
Network Interface Slot 0

Figure 5-5 Inserting a Network Interface Board (GR2000-BH)

Step 2. Insert the network interface board all the way into the chassis until it stops
and fasten it into place with screws on each side.

Figure 5-6 Fastening a Network Interface Board in Place (GR2000-BH)

Caution:
!
5-6
Screws
When using a screwdriver to fasten the NIF in place, be sure that the NIF is
fastened firmly in place.
Network Interface Board
GR2K-GA-0007
Rev. 5.00