Servicing The Tro610 Router; Sim Card(S) Swap; Rescue Port/Recovery; Power Cycle During Firmware Upgrade Or Major Configuration Profile Change - Hitachi TRO610 Series Hardware Reference Manual

Cellular field area network routers

Table of Contents

T RO610 SE RI ES CE LLULAR F IELD A REA NE TWO RK RO UTE RS

•

For EN/IEC 60950-compliant grounding, use size 18 AWG (1 mm2) or larger copper wire.

4.3 Servicing the TRO610 router

The TRO610 router has no user serviceable parts. For any service-related issues contact Hitachi Energy or your partner

support.

Note: hot SIM card swap is not supported by TRO610. It is recommended to plan the SIM swap operation in maintenance

windows (when the router can be disabled), not to disrupt the service in an unplanned way.

A local LAN (via one of the Ethernet ports) connection can be used for a recovery purposes (like the access to local HMI).

Connect a Cat-5 or better Ethernet cable with RJ45 connectors between the computer's (laptop, etc.) Ethernet interface

and Ethernet Port 1 on the TRO610. The Ethernet interface on the computer should be configured to accept a DHCP as-

signed IPv4 address and Default Gateway from the TRO610.

The browser may warn for invalid certificate authority – this is expected. Proceed past the warning and provide the login

username and password (either default or already a customized one) for the admin user.

Try to avoid the power cycle (disconnecting router from the power supply) while performing a firmware upgrade (either via

a local HMI – Tropos Configuration Utility or OTA from Supros) or a major configuration profile change.

Hitachi Energy USA, Inc

3055 Orchard Drive, San Jose, CA 95134

Phone: +1-800-290-5290

SECURITY LEVEL

Public

2023-03-29

27/27

Table of Contents