Figure 4-27 Removing A Memory Card; Figure 4-28 Memory Card Removed - Hitachi GR2000-B Series Installation Manual

Hitachi Gigabit Router GR2000-B Series Installation Guide
Step 2. Push the lever toward the direction indicated by the arrow shown in Figure
4-27 below.
Lever
Memory Card

Figure 4-27 Removing a Memory Card

Step 3. Pull out the memory card as shown in Figure 4-28 below.
Mem ory Card

Figure 4-28 Memory Card Removed.

Caution:
!
4-20
While the access indicator (ACCESS) for a memory card is lit, the memory
card is being accessed. DO NOT pull out a memory card or turn off the power
switch while the memory card is being accessed. If so, you could
permanently damage the memory card.
Some commands require a long time to finish accessing a memory card
when they are executed. Make sure that the access to a memory card is
finished before pulling it out or turning off the power switch.
GR2K-GA-0007
Rev. 5.00