Table of Contents
Advertisement
Hitachi Gigabit Router GR2000-B Series Installation Guide
5.3.2
Installing a Network Interface Board
Step 1.
Insert a network interface board into network interface slot 0 as indicated
by the arrows in as Figure 5-2 below.
Figure 5-2 Inserting a Network Interface Board (GR2000-1B, GR2000-2B, and
Step 2.
Insert the network interface board all the way into the chassis until it stops.
When the board is seated properly, it will be flush with the front panel. You
may then secure the board to the chassis using the two captive screws as
Figure 5-3 below.
Figure 5-3 Inserting a Network Interface Board (GR2000-1B, GR2000-2B, and
Caution:
!
5-4
GR2000-2B+)
GR2000-2B+)
When using a screwdriver to fasten the NIF in place, be sure that the NIF is
fastened firmly in place.
Network Interface
Slot 0 (NIF 0)
Screws
GR2K-GA-0007
Rev. 5.00
Advertisement
Table of Contents
