Table of Contents
Advertisement
Status
The Status tab displays dial-up connection information when the modem is active.
Modem Status
In the Modem Status section, the current active network information from your ISP is
displayed:
•
WAN Gateway (Router) Address
•
WAN IP (NAT Public) Address
•
WAN Subnet Mask
•
DNS Server 1
•
DNS Server 2
•
DNS Server 3
•
Current Active Dial-Up Profile (id)
•
Current Connection Speed
If the modem is inactive, the Status page indicates that the modem is inactive. When the
modem is active, the network settings from the ISP are used for WAN access. If you click
General, then Network, a message is displayed reminding you that the modem is active and
the current network settings are displayed on the Modem Status page.
Configuring the TELE3 SP Modem Connection Page 47
Advertisement
Table of Contents
