About This Guide - SonicWALL TELE3 SP Installation Manual

About This Guide

This guide provides information on installing and registering your SonicWALL Internet Security
appliance. Three common network configurations, Network Address Translation (NAT), NAT
with PPPoE, and NAT with DHCP Client, and are described as part of the installation process.
For detailed information on configuring specific features of your TELE3 SP, consult your
TELE3 SP Administrator's Guide
SonicWALL
The chapters in this guide are summarized as follows:
Chapter 1, Introduction, describes the contents of the package and has an overview of the
configuration process.
Chapter 2, Performing the Initial Configuration, describes the three most common ways
of configuring your SonicWALL for use as a firewall on your network.
Chapter 3, Registering Your SonicWALL, describes the process of registering your
SonicWALL appliance on the MysonicWALL.com web site. You should register your SonicWALL,
any services, and upgrades before installing it in order to access technical support, if necessary,
during installation.
Chapter 4, Hardware Description, has a front and back descriptions of the TELE3 SP
hardware.
Chapter 5, Troubleshooting, provides solutions to problems you may encounter while
configuring your SonicWALL.
Chapter 6, Support, outlines the support packages available from SonicWALL.
Page 4 SonicWALL TELE3 SP Installation Guide
for complete information.