Table of Contents
Advertisement
Configuring Modem Profiles
You can configure modem profiles on the SonicWALL using your dial-up ISP information for the
connection. Multiple modem profiles can be used when you have a different profile for
individual ISPs. Click Profiles, and follow the instructions below to configure your Dial-up
Configuration.
Note: The SonicWALL supports a maximum of ten (10) configuration profiles.
Dial-Up Configuration
The current profile is displayed in the Current Profile field. You can select a profile from the
menu to edit the configuration or create a new profile. To create a new profile, select Add New
Profile from the menu, and enter a name for the profile in the Name field. You can use names
such as Home, Office, or Traveling to distinguish different profiles from each other. After
you have created a name for your dial-up configuration, you must configure the ISP settings in
the dial-up ISP Settings section and the Location Settings section.
ISP Settings
To configure your ISP settings, you must obtain your Internet information from your dial-up
Internet Service Provider. Use the information to configure the following dial-up ISP Settings:
1. Enter the primary telephone number used to dial your ISP in the Primary Phone Number
field.
Note: If a specific prefix is used to access an outside line, such as 9, &, or , , enter the number
as part of the primary phone number.
Page 40 SonicWALL TELE3 SP Installation Guide
Advertisement
Table of Contents
