SonicWALL TELE3 SP Installation Manual page 43

1. Select Persistent Connection if you want the modem connection to stay active until the
WAN Ethernet connection is reactivated. If you want the modem to dial the ISP only when
there is data to transmit, select Dial on Data. Select Manual Dial to dial up the
connection only when you want to dial the ISP as in the case of traveling with the SP.
Note: If you enable Persistent Connection for the modem, the modem connection
remains active until the WAN Ethernet connection is reactivated or you force disconnection
by clicking Disconnect on the Configure page.
2. Enter the number of minutes a dial-up connection is allowed to be inactive in the
Inactivity Timeout(minutes) field. The default value is five (5) minutes.
3. Select the connection speed from the Max Connection Speed(bps) menu.
The TELE3 SP automatically detects the connection speed over the modem, therefore Auto
is the default setting.
4. If you have call waiting on your telephone line, you should disable it or another call can
interrupt your connection to your ISP. Select Disable Call Waiting and then select
command from the list. If you do not see your command listed, select Other, and enter
the command in the field.
5. If the phone number for your ISP is busy, you can configure the number of times that the
SonicWALL modem attempts to connect in the Dial Retries per Phone Number field.
The default value is zero (0).
6. Enter the number of seconds between attempts to redial in the Delay Between Retries
(seconds) field. The default value is five (5) seconds.
7. Click Update to add the dial-up profile to the SonicWALL.
Page 42 SonicWALL TELE3 SP Installation Guide