SonicWALL TELE3 SP Installation Manual page 15

Configuring TCP/IP Settings
The SonicWALL is pre-configured with the IP address "192.168.168.168". During the initial
configuration, it is necessary to temporarily change the IP address of the Management Station
to one in the same subnet as the SonicWALL. For initial configuration, set the IP address of the
Management Station to "192.168.168.200".
Make a note of the Management Station current TCP/IP settings. If the Management Station
accesses the Internet through an existing broadband connection, the TCP/IP settings are
helpful when configuring the IP settings of the SonicWALL.
Windows 95 or 98 computer
1. From the Start list, highlight Settings and then select Control Panel.
2. Double-click the Network icon in the Control Panel window.
3. Double-click TCP/IP in the TCP/IP Properties window.
4. Select the Specify an IP Address radio button.
5. Enter "192.168.168.200" in the IP Address field.
6. Enter "255.255.255.0" in the Subnet Mask field.
7. Click OK, and then click OK again.
8. Restart the computer for changes to take effect.
Windows 2000
1. From the Start list, highlight Settings and then select Network and Dial Up
Connections.
2. Select the Local Area Network icon in the Network and Dial Up Connections window.
3. Highlight TCP/IP in the Local Area Connection Properties window.
4. Select the Specify an IP Address radio button.
5. Enter "192.168.168.200" in the IP Address field.
6. Enter "255.255.255.0" in the Subnet Mask field.
7. Click OK, and then click OK again.
Macintosh computer
1. From the Apple list, choose Control Panel, and then choose TCP/IP to open the TCP/
IP Control Panel.
2. From the Configure list, choose Manually.
3. Enter "192.168.168.200" in the IP address field.
4. Enter "255.255.255.0 in the Subnet Mask field.
5. Click OK.
Page 14 SonicWALL TELE3 SP Installation Guide