SonicWALL TELE3 SP Installation Manual page 70

Hide thumbs Also See for TELE3 SP:
Table of Contents

Advertisement

TELE3 SP Modem Port
A V.90 internal modem provides dial-up access to establish connectivity to the Internet. It
uses a standard RJ-11 telephone cord. It provides a WAN failover connection when the
primary broadband connection fails or it can act as the primary connection to the Internet
for the TELE3 SP.
Cooling Vents
The SonicWALLTELE3 SP is convection cooled; an internal fan is not necessary. Do not
block the cooling vents.
Test
Lights up when the SonicWALL is powered up and performing diagnostic tests for
proper operation. These tests take up to 5 minutes. If the Test LED remains lit after
this time, the firmware is corrupt and must be reinstalled. This process is described in
Chapter 5, Troubleshooting Guide.
Hardware Description Page 69

Advertisement

Table of Contents
loading

Table of Contents