Table of Contents
Advertisement
6 Hardware Description
This chapter provides a detailed illustration and description of the SonicWALL front and back
panels by model. Refer to this chapter to learn about where the LEDs, switches, and connectors
are located.
More information is provided in Appendix A, Technical Specifications.
SonicWALL TELE3 SP Front Panel
The SonicWALL TELE3 SP front panel is shown below, followed by a description of each item.
Modem LED
Power LED
SonicWALL TELE3 SP Front Panel Description
•
Power
Lights up when power is applied to the SonicWALL TELE3 SP.
•
Modem
Lights up when the modem has established a dial-up connection.
There is are two Ethernet ports for the LAN and WAN connections:
•
Link
Lights up when the Twisted Pair port is connected to a 10Mbps or 100Mbps hub or switch,
or directly connected to a computer. Note that the connected Ethernet device must support
the standard Link Integrity test.
•
100
Lights up when the Twisted Pair port is connected to a 100Mbps hub or switch or directly
connected to a computer with a 100Mbps network interface.
•
Activity
Flashes when the SonicWALLTELE3 SP transmits or receives a packet through the Twisted
Pair port.
WAN Port LEDs
LAN Port LEDs
Link, 100, Activity
Link, 100, Activity
Test LED
Hardware Description Page 67
Advertisement
Table of Contents
