SonicWALL TELE3 SP Installation Manual page 26

Hide thumbs Also See for TELE3 SP:

Table of Contents

Configuring LAN Network Settings

7. The Fill in information about your LAN window allows the configuration of the

SonicWALL LAN IP Addresses and the LAN Subnet Mask.The SonicWALL LAN IP

Address is the private IP address assigned to the LAN port of the SonicWALL. The LAN

Subnet Mask defines the range of IP addresses on the LAN. The default values provided

by the SonicWALL work for most networks. If you do not use the default settings, enter the

SonicWALL LAN settings and click Next to continue.

Configuring the SonicWALL DHCP Server

8. The Optional-SonicWALL DHCP Server window configures the SonicWALL DHCP

Server. If enabled, the SonicWALL automatically configures the IP settings of computers

on the LAN. To enable the DHCP server, select the Enable DHCP Server check box, and

specify the range of IP addresses that are assigned to computers on the LAN.

If the Enable DHCP Server check box is not selected, the DHCP Server is disabled. Click

Next to continue.

Performing the Initial Configuration Page 25

Table of Contents